Model Airplane Accessories

First developed in the 1950s for Control Line flying, Perfect's model airplane products later included hardware for many types of R/C modeling. The 6061-T6 aluminum bellcranks, steel control horns and line connectors are still made on the original tooling.


Wood and Self Tapping Screws. Used in a variety of applications.
P101 #0 x 3/8" Wood Screws, plated
P102 #2 x 1/2" Wood Screws, plated
P423 Assorted #0, #2 and #3 Wood Screws
P424 #2 x 1/4" Self Tapping Screws

Gasket Material. 1/64" gasket material that can be cut for use in most sealing applications. 1-3/4" x 3". P105.

Premium Fuel Tubing. Use clear PVC for water, glow fuel or low pressure air. Use flexible Silicone for glow fuel. Use Yellow tubing for gasoline, oil and diesel fuel.
P27 Clear PVC .070 ID x .120 OD
P28 Clear PVC .095 ID x .165 OD
P29 Clear PVC .120 ID x .210 OD
P41 Flexible White Silicone .093 ID x .187 OD
P42 Flexible White Silicone .156 ID x .265 OD
P43 Translucent Yellow Gasoline Tubing .100 ID x .175 OD
P44 Translucent Yellow Gasoline Tubing .165 ID x .240 OD

Manual Fuel Pump. Has a 26mm cap for direct attachment to metal pint and quart fuel cans. Pump locks down when not in use. P52.

Model Lubricants. Specially formulated for model use, these lubricants are excellent for all moving parts. All lubricant bottles feature a standard snap cap, metal applicator tube and tube cap.
P80 Model Racing Oil. Very thin, pure white oil. Nontoxic.
P81 Light Oil. Easy flowing light amber oil for high speed/low loads.
P82 Gear Lubricant. A heavy oil, excellent for gears and bushings.
P83 Special Grease. High quality medium bodied grease, for slow moving parts.
P84 Graphite. Microfine graphite powder for high temp or oil sensitive surfaces.

Model Airplane Tires. Solid and hollow tires with machined aluminum hubs.
P60 1/2" Balloon Tire Solid (pair) P67 1-5/8" Streamline Hollow (pair)
P61 3/4" Balloon Tire Solid (pair) P69 1-3/4" Balloon Hollow (pair)
P62 1" Balloon Tire Solid (pair) P70 2" Balloon Hollow (pair)
P63 1-1/4" Balloon Tire Solid (pair) P71 2-1/2" Balloon Hollow (pair)
P64 1-1/2" Balloon Tire Solid (pair)    
P65 1-1/8" Streamline Hollow (pair)    
P66 1-3/8" Streamline Hollow (pair)    

T-Pins. Plated Steel T-Pins for securing wood parts while gluing. 20 pcs. P206. Battery Cord. Used to connect battery or power panel to Glow Plug Clip. 36" Long, includes terminals. P106. Cloth Hinges. Simple, reliable and inexpensive hinges are suitable for all moving surfaces. Easily installed.
P201 Small 7/8" x 2-3/4" Eight sets
P202 Large 3/8" x 1-3/4" Twelve sets

Quality Miniature Hardware.
P203 4-40 x 1-1/2" Screws, Nuts & Washers, 4 sets P255 4-40 x 1" Screws, Nuts & Washers, 4 sets
P204 4-40 x 1" Screws, Nuts & Washers, 4 sets P256 3-48 x 3/4" Screws, Nuts & Washers, 4 sets
P205 3-48 x 3/4" Screws, Nuts & Washers, 4 sets P257 3-48 x 1/2" Screws, Nuts & Washers, 4 sets
P213 #4 Steel Flat Washers, 20 pcs P422 3-48 x 1/4" Screws and Nuts, 4 sets
P254 4-40 x 1-1/2" Screws, Nuts & Washers, 4 sets P426 Assorted Nuts 2-56, 3-48 and 4-40, 12 PCs

Line Connectors. Steel Control Line Connectors.


Small (1/2A size)
P217 Medium (70 lb per pair)
P227 Large (100 lb per pair)

Leadout Eyelets. Rustproof, low friction brass eyelets. Four each of two sizes. P214.

1/2A Control Horns. Made of plated steel. Nearly unbreakable, hardware included. P231.
Blind Mounting Nuts. For installations where there is no access after assembly. 4 Pieces. P239.

Wire Thimbles. Brass thimbles and copper crimp sleeves are suitable for terminations on all control lines. 4 Sets. P238.
Model Pins. #8 Steel pins, perfect for thin balsa. Approx 100 pcs. P228.

Bellcranks. Made of 6061-T6 Aluminum, these bellcranks come complete with bearings or bushings and mounting hardware.
P222 Medium 2-5/16" x 1-1/16" Brass/Nylon bearing.
P223 Large 3-3/8" x 1-5/16" Brass/Nylon bearing.
P233 1/2A 1-7/8" x 3/4" Brass bushing.

Dacron Control Line. For 1/2A models and beginners. 54 Ft. P259.

Keepers. How's this for a simple, effective keeper? Spring Steel.
P248 1/2A Size
P249 Standard Size

Lead Out Wire. Stainless Steel multi-strand cable.
P232 .018" Diameter Stranded SS Cable.
P225 .027" Diameter Stranded SS Cable.

Glow Plug Clips. Designed to fit all exposed glow plugs, these clips are reversible for 1/2A size or standard size (up to .90) engines. Simply connect to a 1.2V to 1.5V battery or power panel. P262.

Back to Home Page

Problems? Contact the Webmaster
Copyright (c) 2015 The Perfect Parts Company
The Perfect Parts Company
8950 Yellow Brick Rd
Baltimore, MD  21237
Phone: 410-327-3522
Fax: 410-327-7443